3 x 2m colour coded 4mm tubes
These are the 3 tubes which can be used to attach from the output of the valve block to the mixing block.
The CLEAR tube connects to valve 1(the top valve) and carries to coolant liquid.
The BLUE tube connects to valve 2(the middle valve) and carries the air which propels the coolant liquid.
The BLACK tube connects to valve 3(the bottom valve) and carries the air which is used exclusively for chip clearing.
If you damage these tubes on Thermublast or wish to extend them then you may wish to purchase new ones and cut them down as required on fitting.
These are the 3 tubes which can be used to attach from the output of the valve block to the mixing block.
The CLEAR tube connects to valve 1(the top valve) and carries to coolant liquid.
The BLUE tube connects to valve 2(the middle valve) and carries the air which propels the coolant liquid.
The BLACK tube connects to valve 3(the bottom valve) and carries the air which is used exclusively for chip clearing.
If you damage these tubes on Thermublast or wish to extend them then you may wish to purchase new ones and cut them down as required on fitting.
These are the 3 tubes which can be used to attach from the output of the valve block to the mixing block.
The CLEAR tube connects to valve 1(the top valve) and carries to coolant liquid.
The BLUE tube connects to valve 2(the middle valve) and carries the air which propels the coolant liquid.
The BLACK tube connects to valve 3(the bottom valve) and carries the air which is used exclusively for chip clearing.
If you damage these tubes on Thermublast or wish to extend them then you may wish to purchase new ones and cut them down as required on fitting.